Iindidi zeemveliso
1. ImvelisoIimbonakaloof 1x4I-LEDIphaneliUkukhanya30W.
• Iphaneli ye-LED eyonga amandla ihlala ixesha elide ka-5 kuneepaneli ze-fluorescent, Isebenza phakathi koluhlu olubanzi lwe-100-277 VAC.
• Ukusebenzisa i-6063 - i-aluminium ye-T5 yesakhiwo, eqinisekisa ukuba umphezulu awuyi kuhlwa, kwaye unomsebenzi ophezulu wokuhanjiswa kwe-thermal conductivity.
•Isibane sinika isilingi akcent ukukhanya, Ukusebenziseka phantsi-izibane ngaxeshanye.Ilensi yayo yepolycarbonate ecacileyo eneziko elineqabaka ihambisa, ukukhanya okugudileyo ngaphandle kweebhalbhu ezibonakalayo okanye iindawo ezishushu.
•Imilinganiselo ekhoyo (mm): 2x4 ft (40w 50w 60w), 1x4 ft (30w 40w 50w), 2x2 ft (30w 40w 50w) isibane sephaneli yeled.
•Umqhubi wePF ephezulu, PF>0.9, umqhubi omtsha osebenza ngokufanelekileyo.
•Kulula ukuyifaka nokususa.Kwindlela yofakelo lwesibane sokukhanya kwepaneli, kukho ukuhoywa, kunqunyanyisiwe, kunyuswe umphezulu kunye nodonga oluxhonywe lukhoyo.
•Ubomi obude 60,000 hrs kunye neendleko zokuyilungisa eziphantsi kakhulu.
2. Inkcazo yeMveliso:
Umzekelo No | PL-1x4-30W-100 | PL-1x4-30W-125 | PL-1x4-40W-100 | PL-1x4-40W-125 | PL-1x4-50W-100 |
Imodeli ye-UL / DLC | ET-14-30WD-100 | ET-14-30WD-125 | ET-14-40WD-100 | ET-14-40WD-125 | ET-14-50WD-100 |
Ukutya umbane | 30W | 30W | 40W | 40W | 50W |
Ubungakanani (mm) | 303x1213x10mm | ||||
Uhlobo lwe-LED | SMD2835 | ||||
Ubushushu boMbala(K) | 3000K/4000K/5000K/6000K | ||||
I-Luminous Flux(Lm/w) | 100-125lm/w | ||||
Igalelo lombane | I-AC 100V - 277V, 50 - 60Hz | ||||
I-engile yoMtha (iqondo) | >120° | ||||
CRI | >80 | ||||
Amandla Factor | >0.9 | ||||
Indawo yokusebenza | Ngaphakathi | ||||
Izinto zoMzimba | Isakhelo seAluminiyam + LGP + PS/PMMA Diffuser | ||||
IP Rating | IP20 | ||||
Iyacimeka | 0~10V(UL) | ||||
Ubushushu bokusebenza | -20 ° ~ 65 ° | ||||
Ufakelo loKhetho | Isilingi iphinde yamiswa/ inqunyanyisiwe/ ingaphezulu/ iNtaba yodonga | ||||
Umsebenzi wobomi | Iiyure ezingama-60,000 | ||||
Iwaranti | Iminyaka emi-5 |
3. Iphaneli yeLED yeMifanekiso yokuKhanya:
4. Ukusetyenziswa kokukhanya kwePaneli ye-LED:
Ukukhanya kwePaneli ye-UL ye-LED yeyona nto ifanelekileyo yokutshintsha amandla ombane afanelekileyo kwiiofisi, izikolo, iindwendwe, ukhathalelo lwempilo, kunye nezinye iintengiso kunye nezicelo zemizi-mveliso ezifuna ubunzulu bofakelo oluncinci.
Iprojekthi yokuFakela kwakhona:
IProjekthi eNyuselwe uMphezulu:
Iprojekthi yoFakelo oluNxinyiweyo:
IProjekthi yoFakelo oluNyulwe eludongeni:
Isikhokelo sokuFakelo:
Ukukhanya kwepaneli ye-LED, kukho i-ceiling recessed, umphezulu ophakanyisiweyo, ufakelo oluxhonyiweyo, udonga oluxhonywe njl.Umthengi unokukhetha ngokweemfuno zabo.
Ikhithi yokuNxinywa:
Ikhithi yokuxhoma emisiweyo yephaneli ye-LED ivumela iiphaneli ukuba zinqunyanyiswe ukuze zibonakale zihombe ngakumbi okanye apho kungekho silingi yegridi yesiqhelo ye-T-bar.
Izinto ezibandakanyiweyo kwiKit yeNtaba eNxinyiweyo:
Izinto | PL-HPA4 | PL-HPA8 | ||||
6060 | 3012 | 6012 | ||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 4 | X 8 |
Ikhithi yeSakhelo sokuNyuka:
Esi sakhelo sokunyuka komphezulu sifanelekile ukufaka izibane zepaneli ze-Lightman ze-LED kwiindawo ngaphandle kwegridi yesilingi emisiweyo, njengeplasterboard okanye iisilingi zekhonkrithi.Ilungele ii-ofisi, izikolo, izibhedlele njl.
Okokuqala jija amacala amathathu efreyimu kwisilingi.Iphaneli ye-LED emva koko ifakwe isilayidi. Ekugqibeleni gqibezela ufakelo ngokukrukra icala eliseleyo.
Isakhelo sokunyuka komphezulu sinobunzulu obaneleyo ukulungiselela umqhubi we-LED, omele ubekwe embindini wepaneli ukuze ufumane ukuchithwa kakuhle kobushushu.
Izinto ezibandakanyiweyo kwiKhithi yeSakhelo seMount yoMphezulu:
Izinto | I-PL-SMK3030 | I-PL-SMK6363 | I-PL-SMK1233 | I-PL-SMK1263 | |
Isakhelo Dimension | 310x313x50mm | 610x613x50mm | 1220x313x50mm | 1220x613x50mm | |
L310 mm | L610mm | L1220mm | L1220mm | ||
L310mm | L613mm | L313mm | L613mm | ||
X 8 iipcs | |||||
X 4 iipcs | X 6 iipcs |
Iikliphu zaseNtwasahlobo:
Iziqeshana zasentwasahlobo zisetyenziselwa ukufaka ipaneli ye-LED kwiplanga yeplasterboard kunye nomngxuma osikiweyo.Ilungele ii-ofisi, izikolo, izibhedlele njl.
Okokuqala jija iikliphu zasentwasahlobo kwiphaneli ye-LED.Iphaneli ye-LED emva koko ifakwe kumngxuma osikiweyo wesilingi.Ekugqibeleni ugqibezele ukufakela ngokuhlengahlengisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ufakelo luqinile kwaye lukhuselekile.
Amanqaku aqukiwe:
Izinto | PL-CPA4 | PL-CPA8 | ||||
6060 | 3012 | 6012 | ||||
X 4 | X 8 | |||||
X 4 | X 8 |
Ityala leProjekthi: