Iphaneli ye-LED edityanisiweyo ene-SMD2835 36W 40W 30×60 ene-Dimmable Recessed LED Light 300K enolawulo olukude Umfanekiso obonisiweyo

I-SMD2835 36W 40W 30×60 Iphaneli ye-LED enokuDima eNcitshisiweyo Isibane sesilingi esingu-300K esinolawulo olukude

Isibane sephaneli esisicaba se-LED sisebenzisa i-Epistar SMD2835 njenge-chip ye-LED enokukhanya okuphezulu kunye nokubola okuphantsi, umphezulu okhanyayo onomtsalane, ukukhanya okuphantsi kunye nokubonakala okukhululekileyo. Kwaye sisebenzisa ifreyimu ye-aluminium ukuqinisekisa ukusasazwa kobushushu, ukuthintela ukufiphala kunye nokuqina.

Into:Isibane sePaneli ye-LED esifipheleyo esingu-30x60 2.4G

Amandla:18W / 20W / 36W / 40W

Iyancitshiswa:I-2.4G Iyancitshiswa

Ubushushu bombala:Umhlophe ofudumeleyo, Omhlophe wendalo, Omhlophe opholileyo

Umsebenzi wobomi:Iiyure ezingama-≥50000

Thumela i-imeyile kuthi Khuphela njengePDF

Iindidi zemveliso

Iinkcukacha zeMveliso

1. ImvelisoIimbonakaloofI-300x600 IyancitshiswaI-LEDIphaneliUkukhanya okukhanyayot.

•Isibane se-LED esikhanyayo se-2.4G esine-dimmable panel sinoyilo olukhanyayo olusecaleni ukuze sisebenze kakuhle kwaye sisasazeke ngokulinganayo.

•Isibane sonke sisebenza ngokhuseleko oluphezulu. Sisebenza ngombane obanzi, sisebenzisa amandla aphantsi, kwaye sichitha ubushushu obuphantsi, akukho bungozi bunokubakho bokhuseleko.

•Ukusebenza Okugqwesileyo kweYunifomu yokukhanya, Ukupholisa Okulungileyo, Akukho Kuvuza kokukhanya.

•Ukufakela izibane zephaneli ze-LED ezifiphazekayo, kukho ezixhonyiweyo, ezifakwe kumphezulu kwaye zivaliwe ukuze ukhethe.

•Isibane sephaneli ye-LED esifinyezwa yi-2.4G sisebenzisa i-aluminium yesithuba engama-6030. Ukumelana okuhle kakhulu nokuqhekeka koxinzelelo, umlinganiselo wokukhanya, ukumelana nokugqwala, ubulukhuni obuphezulu, unyango lwe-anode oxidation, aluze luphele.

2. Iinkcukacha zeMveliso:

Inombolo yoMzekelo	PL-3060-18W	I-PL-3060-20W	PL-3060-36W	I-PL-3060-40W
Ukutya umbane	18W	20W	36W	40W
I-Luminous Flux (Lm)	1440～1620lm	1600～1800lm	2880～3240lm	3200～3600lm
Ubungakanani be-LED (ii-pcs)	96pcs	100pcs	192pcs	204pcs
Uhlobo lwe-LED	I-SMD 2835
Ubushushu boMbala (K)	2800 – 6500K
Umbala	Efudumeleyo/Yendalo/Epholileyo Emhlophe
Ubukhulu	595x295x10mm
I-Angle yeBeam (isidanga)	>120°
Ukusebenza kakuhle kokukhanya (lm/w)	>80lm/w
I-CRI	>80
Amandla	>0.95
I-Voltage yokufaka	I-AC 85V - 265V
Uluhlu lweeFrequency (Hz)	50 - 60Hz
Indawo yokusebenza	Ngaphakathi endlini
Izinto zomzimba	Isakhelo se-aluminium alloy kunye ne-PS Diffuser
Uvavanyo lwe-IP	IP20
Ubushushu bokusebenza	-20°~65°
Iyancitshiswa	I-2.4G Iyancitshiswa
Umsebenzi wobomi	iiyure ezingama-50,000
Iwaranti	Iminyaka emi-3 / Iminyaka emi-5

3.Imifanekiso yokukhanya kwephaneli ye-LED:

1. Iphaneli ye-LED eyi-600x300 ekhanyayo-emhlophe

2. Isibane sePaneli ye-LED esingu-600x300 esine-Suspension Kit

5. Isibane sephaneli esisicaba se-LED esingu-30x60cm

4. Ukukhanya kwePaneli ye-LED Isicelo:

Isibane se-flat panel se-LED se-Lightman sisetyenziswa kakhulu ekukhanyiseni ikhaya, ekukhanyiseni izindlu, kwigumbi lokuhlala; ekukhanyiseni ikhitshi, ekukhanyiseni igumbi lokulala njl. Ingasetyenziswa nakwizibane zorhwebo, eofisini, kwigumbi leentlanganiso, kwigumbi lesilingi se-LED njl.

Iprojekthi Yokufakela Engagqitywanga:

Iprojekthi Yokufakela Okufakwe Kumphezulu:

8. Umzekelo wofakelo olufakwe kumphezulu

Iprojekthi Yokufakela Emiswe Ngesandla:

11. Isibane sephaneli ye-suspension LED esingu-600x600

Iprojekthi Yokufakela Udonga Olufakelwe:

11. isibane sephaneli yodonga olukhokelwayo

Isikhokelo soFakelo:

Kwizibane zephaneli ze-LED, kukho iindlela zokufaka ezifakwe eludongeni, ezifakwe kumphezulu, ezixhonyiweyo, ezifakwe eludongeni njl.njl. iindlela zokufaka ezinezixhobo zokufaka ezifanelekileyo. Umthengi unokukhetha ngokweemfuno zakhe.

Ikhithi yokumiswa:

Isixhobo sokuxhoma esixhonyiweyo sephaneli ye-LED sivumela iiphaneli ukuba zixhonywe ukuze zibukeke zintle ngakumbi okanye apho kungekho silingi yegridi ye-T-bar yendabuko ekhoyo.

Izinto eziqukwe kwiSuspended Mount Kit:

Izinto	I-PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Ikhithi yesakhelo sokuFakela umphezulu:

Olu phahla lokuxhoma umphezulu lufanelekile ukufaka izibane zephaneli ze-Lightman LED kwiindawo ezingenayo igridi yesilingi exhonyiweyo, njengeplasterboard okanye isilingi sekhonkrithi. Lulungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhoma okungasemva kungenakwenzeka.

Okokuqala faka amacala amathathu esakhelo esilingeni ngesikrufu. Emva koko iphaneli ye-LED iyatyibilika. Ekugqibeleni gqibezela ukufakela ngokukrufula icala eliseleyo.

Isakhelo sokufakelwa komphezulu sinobunzulu obaneleyo bokwamkela umqhubi we-LED, ekufuneka ubekwe embindini wephaneli ukuze ufumane ubushushu obuhle.

Izinto eziqukiweyo kwiSurface Mount Frame Kit:

Izinto	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Ubukhulu besakhelo	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Isakhelo A	L302 mm X 2 ii-pcs	L302mm X 2 ii-pcs	L602 mm X 2 ii-pcs	I-L622mm X 2 ii-pcs	L1202mm X 2 ii-pcs	L1202 mm X 2 ii-pcs
Isakhelo B	L305 mm X 2 ii-pcs	L305 mm X 2 ii-pcs	I-L605mm X 2 ii-pcs	I-L625 mm X 2 ii-pcs	L305mm X 2 ii-pcs	I-L605mm X 2 ii-pcs
	Ii-X 8 ii-pcs
	X 4 ii-pcs			Ii-X 6 ii-pcs

Ikhithi yokuFaka isilingi:

Ikhithi yokuxhoma eluphahleni yenzelwe ngokukodwa, enye indlela yokufaka izibane zephaneli ze-SGSLight TLP ze-LED kwiindawo ezingenayo igridi yesilingi exhonyiweyo, njengebhodi yeplasterboard okanye iisilingi zekhonkrithi okanye udonga. Ilungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhoma okungasemva kungenakwenzeka.

Okokuqala faka iikliphu eluphahleni/eludongeni, uze ufake iikliphu ezihambelanayo kwiphaneli ye-LED. Emva koko dibanisa iikliphu. Ekugqibeleni gqibezela ukufakela ngokubeka i-LED driver ngasemva kwephaneli ye-LED.

Izinto eziqukiweyo kwiiKits zokuFaka isilingi:

Izinto	I-PL-SMC4				I-PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Iikliphu zaseNtwasahlobo:

Ii-spring clips zisetyenziselwa ukufaka iphaneli ye-LED kwisilingi yeplasterboard enemingxuma esikiweyo. Ilungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhonywa okungasemva kungenakwenzeka.

Okokuqala faka iikrufu zentwasahlobo kwiphaneli ye-LED. Emva koko iphaneli ye-LED ifakwa kumngxuma osikiweyo wesilingi. Ekugqibeleni gqibezela ukufakela ngokulungelelanisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ukufakela kuqinile kwaye kukhuselekile.

Izinto ezibandakanyiweyo: