Iindidi zeemveliso
1. ImvelisoIimbonakaloof 2x4I-LEDIphaneliUkukhanya60W.
•Izibane zepaneli ze-Lightman ze-LED zamkela umgangatho ophezulu we-aluminiyam kunye nemathiriyeli ye-acrylic.
• I-Lightman UL LED Ceiling Panel Light isebenzisa i-ultra-thin Ubunzima bokukhanya, ukwakhiwa okulula, uyilo oluhle.
• Izibane zepaneli ze-UL dimmable dimmable zine-0-10v dimmable, 24VDC & CCT & RGB dimmable with remote controller or DMX.
• Ukukhanya kwethu kwepaneli ekhokelweyo kunokwenziwa ukuze kulingane nesicelo sakho somntu ngamnye.I-OEM kunye ne-ODM zamkelwe.
•Umbala otshintshayo ocimekayo wepaneli yepaneli yokukhanya 2x4 sebenzisa i-Epistar SMD2835 kumthombo wokukhanya okhokelwayo ngokukhanya okuphezulu kunye nokubola okuphantsi.Ubushushu bombala obahlukileyo kukhetho lwakho, olufana ne-3000K, 3500K, 4000K, 4500K, 5000K.Kwaye i-CRI ekhokelwayo ingaphezulu kwe-80, kwaye i-angle ye-beam inkulu kune-120 °.
• Ubomi obude kunye neeyure ezingaphezulu kwe-60000 yokuphila.
2. Inkcazo yeMveliso:
Umzekelo No | PL-2x4-40W-125 | PL-2x4-50W-100 | PL-2x4-50W-125 | PL-2x4-60W-100 |
Imodeli ye-UL / DLC | ET-24-40WD-125 | ET-24-50WD-100 | ET-24-50WD-125 | ET-24-60WD-100 |
Ukutya umbane | 40W | 50W | 50W | 60 W |
Ukusebenza kokukhanya | 100lm/w-125lm/w | |||
Ubungakanani (mm) | 603x1213x10mm | |||
Ubushushu boMbala (K) | 3000K/4000K/5000K/6000K | |||
Uhlobo lwe-LED | SMD 2835 | |||
Igalelo lombane | AC100-277V, 50/60Hz | |||
I-engile yoMtha (iqondo) | >120° | |||
CRI | >80Ra | |||
Amandla Factor | >0.95 | |||
THD | <15% | |||
Indawo yokusebenza | Ngaphakathi | |||
Izinto zoMzimba | Isakhelo seAluminiyam + iMitsubishi LGP + PS/PMMA Diffuser | |||
IP Rating | IP20 | |||
Ubushushu bokusebenza | -20 ° ~ 65 ° | |||
Iyacimeka | 0~10V(UL) | |||
Ufakelo loKhetho | Isilingi iphinde yamiswa/ inqunyanyisiwe/ ingaphezulu/ iNtaba yodonga | |||
Umsebenzi wobomi | Iiyure ezingama-60,000 | |||
Iwaranti | Iminyaka emi-5 |
3. Iphaneli yeLED yeMifanekiso yokuKhanya:
4. Ukusetyenziswa kokukhanya kwePaneli ye-LED:
Ukukhanya kwePaneli ye-Lightman UL ye-LED yeyona nto ifanelekileyo yokutshintsha amandla ombane afanelekileyo kwi-fluorescent fixtures eziofisini, ezikolweni, kwindwendwe, kukhathalelo lwempilo, nakwezinye iintengiso kunye nezicelo zemizi-mveliso ezifuna ubunzulu bofakelo oluncinci.
Iprojekthi yokuFakela kwakhona:
Iprojekthi yoFakelo oluNxinyiweyo:
IProjekthi eNyuselwe uMphezulu:
IProjekthi yoFakelo oluNyulwe eludongeni:
Isikhokelo sokuFakelo:
Ukukhanya kwepaneli ye-LED, kukho i-ceiling recessed, umphezulu ophakanyisiweyo, ufakelo oluxhonyiweyo, udonga oluxhonywe njl.Umthengi unokukhetha ngokweemfuno zabo.
Ikhithi yokuNxinywa:
Ikhithi yokuxhoma emisiweyo yephaneli ye-LED ivumela iiphaneli ukuba zinqunyanyiswe ukuze zibonakale zihombe ngakumbi okanye apho kungekho silingi yegridi yesiqhelo ye-T-bar.
Izinto ezibandakanyiweyo kwiKit yeNtaba eNxinyiweyo:
Izinto | PL-HPA4 | PL-HPA8 | ||||
6060 | 3012 | 6012 | ||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 4 | X 8 |
Ikhithi yeSakhelo sokuNyuka:
Esi sakhelo sokunyuka komphezulu sifanelekile ukufaka izibane zepaneli ze-Lightman ze-LED kwiindawo ngaphandle kwegridi yesilingi emisiweyo, njengeplasterboard okanye iisilingi zekhonkrithi.Ilungele ii-ofisi, izikolo, izibhedlele njl.
Okokuqala jija amacala amathathu efreyimu kwisilingi.Iphaneli ye-LED emva koko ifakwe isilayidi. Ekugqibeleni gqibezela ufakelo ngokukrukra icala eliseleyo.
Isakhelo sokunyuka komphezulu sinobunzulu obaneleyo ukulungiselela umqhubi we-LED, omele ubekwe embindini wepaneli ukuze ufumane ukuchithwa kakuhle kobushushu.
Izinto ezibandakanyiweyo kwiKhithi yeSakhelo seMount yoMphezulu:
Izinto | I-PL-SMK3030 | I-PL-SMK6363 | I-PL-SMK1233 | I-PL-SMK1263 | |
Isakhelo Dimension | 310x313x50mm | 610x613x50mm | 1220x313x50mm | 1220x613x50mm | |
L310 mm | L610mm | L1220mm | L1220mm | ||
L310mm | L613mm | L313mm | L613mm | ||
X 8 iipcs | |||||
X 4 iipcs | X 6 iipcs |
Iikliphu zaseNtwasahlobo:
Iziqeshana zasentwasahlobo zisetyenziselwa ukufaka ipaneli ye-LED kwiplanga yeplasterboard kunye nomngxuma osikiweyo.Ilungele ii-ofisi, izikolo, izibhedlele njl.
Okokuqala jija iikliphu zasentwasahlobo kwiphaneli ye-LED.Iphaneli ye-LED emva koko ifakwe kumngxuma osikiweyo wesilingi.Ekugqibeleni ugqibezele ukufakela ngokuhlengahlengisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ufakelo luqinile kwaye lukhuselekile.
Amanqaku aqukiwe:
Izinto | PL-CPA4 | PL-CPA8 | ||||
6060 | 3012 | 6012 | ||||
X 4 | X 8 | |||||
X 4 | X 8 |
UkuKhanya kweSibhedlele (eTshayina)
UkuKhanya kweOfisi (eTshayina)
UkuKhanya kweKlinikhi (UK)