I-KTV Lighting Flexible DC12V 18W RGB LED Panel Izibane 60×30

Ukukhanya kwePaneli ye-RGB ye-LED luhlobo lwezibane zokukhanyisa ezikumgangatho ophezulu kunye nomgangatho ophezulu wangaphakathi, isakhelo saso sangaphandle esenziwe nge-aluminiyam e-anodised, isibane sonke sihle kwaye sinobunewunewu, asinayo isiphumo esihle sokukhanyisa kuphela, kodwa sinokuzisa iimvakalelo ezintle.

Umba:300x600 RGB LED Panel Light

Amandla:18W

Umbane osebenzayo:I-DC12V /DC24V

Iyasinyameka:Ukutshintsha Umbala we-RGB Dimable

Umsebenzi wobomi:≥50000 Iiyure

Thumela i-imeyile kuthi Khuphela njengePDF

Iindidi zeemveliso

Iinkcukacha zeMveliso

Isikhokelo sokuFakelo

Ityala leProjekthi

Ividiyo yeMveliso

1.Intshayelelo yeMveliso ye595x295mm RGB Iphaneli yeLED yokukhanya 18w.

•Ngomlawuli we-RGB, iphaneli iyakwazi ukwenza iindlela zokutshintsha umbala kunye nokulawula ukukhanya.Kwaye isixhobo esikhokelwayo sine-DC12V okanye i-24 V yokusebenza.

•Uyilo lweteyiphu ye-rgb ekhokelela kwisibane sepaneli ekhokelwayo ayifani nodidi lwe-rgb ngokubanzi.Ububanzi bethu bomtya obuyilelweyo yi-6mm enokwenza i-rgb led panel light fixture i-ultra slim njengobunzima besakhelo sokukhanya sephaneli eqhelekileyo.Ifuna i-84pcs SMD5050 led chips ukufezekisa ukukhanya okufanayo.Kwaye ngokuqwalasela isakhiwo sokukhanya kwepaneli ekhokeleyo, xa siyila iteyiphu yethu ye-led strip, senza ubhedu oluphindwe kabini ngaphakathi kuyilo lwesekethe, kunye nokwenza imingxunya yobhedu ngakumbi kwaye senze indawo ye-welding ibe nkulu ukuvumela ukuhanjiswa kobushushu kwisakhelo se-aluminium ngokukhawuleza.

• Iphaneli yokukhanya ekhokelwa yi-RGB isebenzisa i-Taiwan EPISTAR5050, iqondo lokushisa kwi-80 degrees, ukukhanya okukhokelwayo kuyancipha kuphela malunga ne-3%.Kwaye sisebenzisa isakhiwo esikhokelayo solawulo lwe-thermal, ubukhulu bodonga lomzimba olupholileyo lwe-3.0MM, ukunyuka kweqondo lokushisa eliphantsi, ukwandisa kakhulu ubomi besibane sonke.

2. Ipharamitha yeMveliso:

Umzekelo No	PL-60120-48W-RGB	PL-3060-18W-RGB	PL-3030-18W-RGB
Ukutya umbane	48W	18W	18W
Ubungakanani (mm)	595119511mm	29559511mm	29529511mm
Ubuninzi be-LED (iipcs)	182pcs	84pcs	84pcs
Uhlobo lwe-LED	SMD5050
Umbala	Imibala emininzi
I-engile yoMtha (iqondo)	>120°
CRI	>80
Umqhubi we-LED	Umqhubi we-LED rhoqo
Umbane ophumayo	DC12 / 24V
Igalelo lombane	I-AC 85V - 265V, 50 - 60Hz
Indawo yokusebenza	Ngaphakathi
Izinto zoMzimba	Isakhelo se-aluminium alloy kunye ne-PS Diffuser
IP Rating	IP20
Ubushushu bokusebenza	-25 ° ~ 70 °
Indlela eDimable	Ukuncipha kwe-RGB
Ufakelo loKhetho	Ibuyiselwe/inqunyanyisiwe/inyuswe ngaphezulu
Umsebenzi wobomi	Iiyure ezingama-50,000
Iwaranti	3Iminyaka

3.Iphaneli yeLED yeMifanekiso yokukhanya:

2.4Ghz RGB Isilawuli kunye neRemoter:

• Inkqubo yokulawula ekulula ukuyisebenzisa.

•Sebenzisa inkqubo yolawulo ye-2.4G Hz RGB, isakhono esichasene nokuphazamiseka.

•Ngaphandle kokuphazamiseka phakathi kwabalawuli.

• Iyakwazi ukulungelelanisa ukukhanya kunye nemibala ngexesha elinye.

• Iindidi ezingama-20 zeendlela ezidanyazayo ezininzi ezikhoyo.

• Umgama wolawulo olukude ongenazingcingo ungafikelela kwi-25-30 yeemitha.

•Wireless RF Controller Remote Touch Panel for RGB.

6. I-DC24V RGB LED Panel Light Wiring Diagram

4. Ukusetyenziswa kokukhanya kwePaneli ye-LED:

I-Multicolor RGB Dimming LED Panel Light yokukhanyisa ibha, ukukhanya kweklabhu, ukukhanya kwangaphantsi, ukukhanya kweevenkile, kunye nokunye.

Ngaphambili: 40W DMX 512 Surface Mounted RGB LED Panel Light 120x30cm

Okulandelayo: Ulawulo lwe-infrared yeSakhelo esimthubi 18W iRecessed RGB LED Panel Isibane 30×30

Isikhokelo sokuFakelo:

Ukukhanya kwepaneli ye-LED, kukho i-ceiling recessed, umphezulu ophakanyisiweyo, ufakelo oluxhonyiweyo, udonga oluxhonywe njl.Umthengi unokukhetha ngokweemfuno zabo.

Ikhithi yokuNxinywa:

Ikhithi yokuxhoma emisiweyo yephaneli ye-LED ivumela iiphaneli ukuba zinqunyanyiswe ukuze zibonakale zihombe ngakumbi okanye apho kungekho silingi yegridi yesiqhelo ye-T-bar.

Izinto ezibandakanyiweyo kwiKit yeNtaba eNxinyiweyo:

Izinto	I-PL-SCK4				I-PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Ikhithi yeSakhelo sokuNyuka:

Esi sakhelo sokunyuka komphezulu sifanelekile ukufaka izibane zepaneli ze-Lightman ze-LED kwiindawo ngaphandle kwegridi yesilingi emisiweyo, njengeplasterboard okanye iisilingi zekhonkrithi.Ilungele ii-ofisi, izikolo, izibhedlele njl.

Okokuqala jija amacala amathathu efreyimu kwisilingi.Iphaneli ye-LED emva koko ifakwe isilayidi. Ekugqibeleni gqibezela ufakelo ngokukrukra icala eliseleyo.

Isakhelo sokunyuka komphezulu sinobunzulu obaneleyo ukulungiselela umqhubi we-LED, omele ubekwe embindini wepaneli ukuze ufumane ukuchithwa kakuhle kobushushu.

Izinto ezibandakanyiweyo kwiKhithi yeSakhelo seMount yoMphezulu:

Izinto	I-PL-SMK3030	I-PL-SMK6030	I-PL-SMK6060	I-PL-SMK6262	I-PL-SMK1230	I-PL-SMK1260
Isakhelo Dimension	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Isakhelo A	L302 mm X 2 iipcs	L302mm X 2 iipcs	L602 mm X 2 iipcs	L622mm X 2 iipcs	L1202mm X 2 iipcs	L1202 mm X 2 iipcs
Isakhelo B	L305 mm X 2 iipcs	L305 mm X 2 iipcs	L605mm X 2 iipcs	L625 mm X 2 iipcs	L305mm X 2 iipcs	L605mm X 2 iipcs
	X 8 iipcs
	X 4 iipcs			X 6 iipcs

IKit yeNtaba yeCeiling:

Ikhithi yokubeka isilingi yenzelwe ngokukodwa, enye indlela yokufaka i-SGSLight TLP izibane zepaneli ze-LED kwiindawo ezingenawo igridi yesilingi emisiweyo, njengeplasterboard okanye iisilingi zekhonkrithi okanye udonga.Ilungele ii-ofisi, izikolo, izibhedlele njl.

Okokuqala jija iziqeshana eludongeni / eludongeni, kunye neziqeshana ezihambelanayo kwipaneli ye-LED.Emva koko dibanisa iikliphu.Ekugqibeleni ugqibezele ukufakela ngokubeka umqhubi we-LED ngasemva kwephaneli ye-LED.

Izinto ezibandakanyiweyo kwiiKits Mount Kits:

Izinto	I-PL-SMC4				PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Iikliphu zaseNtwasahlobo:

Iziqeshana zasentwasahlobo zisetyenziselwa ukufaka ipaneli ye-LED kwiplanga yeplasterboard kunye nomngxuma osikiweyo.Ilungele ii-ofisi, izikolo, izibhedlele njl.

Okokuqala jija iikliphu zasentwasahlobo kwiphaneli ye-LED.Iphaneli ye-LED emva koko ifakwe kumngxuma osikiweyo wesilingi.Ekugqibeleni ugqibezele ukufakela ngokuhlengahlengisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ufakelo luqinile kwaye lukhuselekile.

Amanqaku aqukiwe: