Isibane sePaneli ye-LED ye-UGR19 esingenakukhanya esingu-60×60 esine-36W 40W 48W

I-Glare ingenza iindawo zokusebenza zingakhululeki kwaye yehlise imveliso. Iiphaneli zethu ze-UGR19 ze-LED ezakhiwe ngokucinga oku zilungele useto lweeofisi nakwezinye iindawo apho i-glare inokuba yingxaki. Njengoko ikwii-temperature ezahlukeneyo zemibala, ungafumana iziphumo zokukhanya ozifunayo ngaphandle kokukhathazeka nge-glare ngezi paneli ze-LED.

Into:Isibane sePaneli yeFlat ye-LED ye-600x600 UGR19

Amandla:36W / 40W / 48W / 54W / 60W / 72W / 80W

I-Voltage yokufaka:I-AC85~265V, 50-60Hz

Ubushushu bombala:Umhlophe ofudumeleyo, Omhlophe wendalo, Omhlophe opholileyo

Umsebenzi wobomi:Iiyure ezingama-≥50000

Thumela i-imeyile kuthi Khuphela njengePDF

Iindidi zemveliso

Iinkcukacha zeMveliso

Isikhokelo soFakelo

Ityala leProjekthi

Ividiyo yeMveliso

1.Intshayelelo yeMveliso ye595x595 UGR<19I-LEDIphaneliUkukhanya.

• Uyilo lwefashoni oluncinci kakhulu. Iphaneli yesibane se-UGR19 LED isebenzisa ii-LED ze-SMD2835 ezine-lumen ephezulu

njengomthombo wokukhanya.

• I-CRI ephezulu, buyisela ubuhle bokwenyani. Ukhetho olufanelekileyo lokusetyenziswa kwevenkile, yonwabele ulonwabo lokukhanya.

• Obungakanani obungakumbi be-UGR<19 iinketho zezibane zephaneli ye-LED: 300*300 (295x295mm), 600*300 (595x295mm), 600*600 (595x595mm), 600*1200 (595x1195mm), 300*1200 (295x1195mm), 620*620(620x620mm).

• Kulula ukuyifaka, ivaliwe, ixhonywe okanye ifakwe phezu komhlaba. Inobomi obuhlala iiyure ezingama-50000.

Kwaye isibane sephaneli se-ugr<19 LED sinokufinyezwa sisilawuli esikude.

• Ihotele, igumbi leentlanganiso, ifektri okanye iofisi, indawo yokusetyenziswa kwezorhwebo, indawo yokuhlala okanye izibonelelo zoluntu, isikolo, isibhedlele, indawo yokonga amandla kunye ne-CRI ephezulu, i-UGR<19 LED Panel Lights uphawu lokukhanya lwendabuko, lubonakala kwizibane ezibhityileyo kakhulu, ukhetho lokuqala lweofisi, isibane sendlu.

• Ezinye iindlela zokukhetha i-dimming kunye ne-sensor-ZigBee, Dali, PWM, 0/1-10V, i-micro-wave sensor, i-light sensor njl.

2. Ipharamitha yeMveliso:

Inombolo yoMzekelo	PL-6060-36W-UGR	I-PL-6060-40W-UGR	I-PL-6060-48W-UGR	I-PL-6060-54W-UGR
Ukutya umbane	36W	40W	48W	54W
I-Luminous Flux (Lm)	3240～3600lm	3600～4000lm	4320～4800lm	4860～5400lm
Ubungakanani be-LED (ii-pcs)	192pcs	204pcs	252pcs	280pcs
Uhlobo lwe-LED	I-SMD 2835
Ubushushu boMbala (K)	2800 – 6500K
Umbala	Efudumeleyo/Yendalo/Epholileyo Emhlophe
Ubukhulu	595x595x11mm
I-Angle yeBeam (isidanga)	90°
Ukusebenza kakuhle kokukhanya (lm/w)	>90lm/w
I-CRI	>80
Amandla	>0.95
I-Voltage yokufaka	I-AC 85V - 265V
Uluhlu lweeFrequency (Hz)	50 - 60Hz
Indawo yokusebenza	Ngaphakathi endlini
Izinto zomzimba	Isakhelo se-aluminium alloy kunye ne-Prismatic diffuser
Uvavanyo lwe-IP	IP20
Ubushushu bokusebenza	-20°~65°
Iyancitshiswa	Ukhetho
Umsebenzi wobomi	iiyure ezingama-50,000
Iwaranti	Iminyaka emi-3 okanye emi-5

Imifanekiso yezibane zephaneli ze-LED ezi-3.:

3. I-Micro Prismatic Diffuser VS i-Norma PS Diffuser

4. UGR19 VS Isibane sePaneli ye-LED esiQhelekileyo

5. I-Prismatic Diffuser VS i-Normal Diffuser

6. Ingxelo yoVavanyo lwePhotometric yePanel Light ye-UGR19

4. Ukukhanya kwePaneli ye-LED Isicelo:

Isibane sePaneli yeSibhakabhaka se-LED esingenafreyimu sisetyenziswa kakhulu eofisini, esibhedlele, kwigumbi lokulala, kwivenkile enkulu, ezikolweni, kwiifektri, ejimini, ehotele, kwisixeko se-anime njl.

Iprojekthi Yokufakela Udonga Olufakelwe:

11. Isibane sephaneli se-ugr16 esifakwe eludongeni

Iprojekthi Yokufakela Engagqitywanga:

8. Isibane sePaneli ye-LED ye-600x600mm UR19 eOfisini

Iprojekthi Yokufakela Emiswe Ngesandla:

10. Isibane sephaneli ye-LED esixhonyiweyo esingu-30x120

Iprojekthi Yokufakela Okufakwe Kumphezulu:

9. Isibane sephaneli ye-LED esifakwe kumphezulu we-ugr19

Ngaphambili: Isibane se-UVC esiphathwayo seSibhedlele seFactory esinezibane ze-UV ze-Ozone ze-Ultraviolet.

Okulandelayo: I-CRI90 62×62 I-UGR echasene nokukhanya<19 Isibane sePaneli esiSicaba se-LED 620*620 36W 40W

Isikhokelo soFakelo:

Kwizibane zephaneli ze-LED, kukho iindlela zokufaka ezifakwe eludongeni, ezifakwe kumphezulu, ezixhonyiweyo, ezifakwe eludongeni njl.njl. iindlela zokufaka ezinezixhobo zokufaka ezifanelekileyo. Umthengi unokukhetha ngokweemfuno zakhe.

Ikhithi yokumiswa:

Isixhobo sokuxhoma esixhonyiweyo sephaneli ye-LED sivumela iiphaneli ukuba zixhonywe ukuze zibukeke zintle ngakumbi okanye apho kungekho silingi yegridi ye-T-bar yendabuko ekhoyo.

Izinto eziqukwe kwiSuspended Mount Kit:

Izinto	I-PL-SCK4				PL-SCK6
	3030	3060	6060	6262	3012	6012
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 2				X 3
	X 4				X 6

Ikhithi yesakhelo sokuFakela umphezulu:

Olu phahla lokuxhoma umphezulu lufanelekile ukufaka izibane zephaneli ze-Lightman LED kwiindawo ezingenayo igridi yesilingi exhonyiweyo, njengeplasterboard okanye isilingi sekhonkrithi. Lulungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhoma okungasemva kungenakwenzeka.

Okokuqala faka amacala amathathu esakhelo esilingeni ngesikrufu. Emva koko iphaneli ye-LED iyatyibilika. Ekugqibeleni gqibezela ukufakela ngokukrufula icala eliseleyo.

Isakhelo sokufakelwa komphezulu sinobunzulu obaneleyo bokwamkela umqhubi we-LED, ekufuneka ubekwe embindini wephaneli ukuze ufumane ubushushu obuhle.

Izinto eziqukiweyo kwiSurface Mount Frame Kit:

Izinto	PL-SMK3030	PL-SMK6030	PL-SMK6060	PL-SMK6262	PL-SMK1230	PL-SMK1260
Ubukhulu besakhelo	302x305x50 mm	302x605x50 mm	602x605x50 mm	622x625x50mm	1202x305x50mm	1202x605x50mm
Isakhelo A	L302 mm X 2 ii-pcs	L302mm X 2 ii-pcs	L602 mm X 2 ii-pcs	I-L622mm X 2 ii-pcs	L1202mm X 2 ii-pcs	L1202 mm X 2 ii-pcs
Isakhelo B	L305 mm X 2 ii-pcs	L305 mm X 2 ii-pcs	I-L605mm X 2 ii-pcs	I-L625 mm X 2 ii-pcs	L305mm X 2 ii-pcs	I-L605mm X 2 ii-pcs
	Ii-X 8 ii-pcs
	X 4 ii-pcs			Ii-X 6 ii-pcs

Ikhithi yokuFaka isilingi:

Ikhithi yokuxhoma eluphahleni yenzelwe ngokukodwa, enye indlela yokufaka izibane zephaneli ze-SGSLight TLP ze-LED kwiindawo ezingenayo igridi yesilingi exhonyiweyo, njengebhodi yeplasterboard okanye iisilingi zekhonkrithi okanye udonga. Ilungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhoma okungasemva kungenakwenzeka.

Okokuqala faka iikliphu eluphahleni/eludongeni, uze ufake iikliphu ezihambelanayo kwiphaneli ye-LED. Emva koko dibanisa iikliphu. Ekugqibeleni gqibezela ukufakela ngokubeka i-LED driver ngasemva kwephaneli ye-LED.

Izinto eziqukiweyo kwiiKits zokuFaka isilingi:

Izinto	I-PL-SMC4				I-PL-SMC6
	3030	3060	6060	6262	3012	6012
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6
	X 4				X 6

Iikliphu zaseNtwasahlobo:

Ii-spring clips zisetyenziselwa ukufaka iphaneli ye-LED kwisilingi yeplasterboard enemingxuma esikiweyo. Ilungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhonywa okungasemva kungenakwenzeka.

Okokuqala faka iikrufu zentwasahlobo kwiphaneli ye-LED. Emva koko iphaneli ye-LED ifakwa kumngxuma osikiweyo wesilingi. Ekugqibeleni gqibezela ukufakela ngokulungelelanisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ukufakela kuqinile kwaye kukhuselekile.

Izinto ezibandakanyiweyo: