Iindidi zeemveliso
1. ImvelisoIimbonakaloof 1x4I-LEDIphaneliUkukhanya.
•Uyilo lomzimba obhityileyo kakhulu, ubukhulu be-10mm;iqokobhe lealuminiyam-Umgangatho ophezulu we-aluminiyam, ukuchithwa kakuhle kobushushu, i-anodized, anti-corrosion.
•I-Edge-lit LED ukwenzela ukuba mhlophe okuphezulu kunye nokuqaqamba okufanayo.
•Isakhelo seAluminiyam kunye nomgangatho olungileyo wePS kunye nePMMA LGP, ukuhanjiswa okuphezulu.
• Umgangatho ophezulu we-SMD LED chip ufikelele ekusebenzeni okuphezulu.
• Akukho Foam EVA ifakiwe, ngaphandle kokuchaphazela ukusebenza, ukhuseleko lomlilo luphezulu.
• Ukuphindaphinda okuphantsi, ukuphuma kokukhanya okuthambileyo, ukwanga ungcoliseko lokukhanya.
•Ihuku yokuthintela inyikima ngasemva ethi ibambelele kwisilingi ye-T-Bar.
•Siyifektri, sinokwenza ngokwezifiso ukukhanya kwepaneli ye-LED ngokuhambelana nabathengi.Kwaye sikwabonelela ngeewattages ezahlukeneyo ngokweemfuno zabathengi.
2. Inkcazo yeMveliso:
Umzekelo No | PL-1x4-30W-100 | PL-1x4-30W-125 | PL-1x4-40W-100 | PL-1x4-40W-125 | PL-1x4-50W-100 |
Imodeli ye-UL / DLC | ET-14-30WD-100 | ET-14-30WD-125 | ET-14-40WD-100 | ET-14-40WD-125 | ET-14-50WD-100 |
Ukutya umbane | 30W | 30W | 40W | 40W | 50W |
Ubungakanani (mm) | 303x1213x10mm | ||||
Uhlobo lwe-LED | SMD2835 | ||||
Ubushushu boMbala(K) | 3000K/4000K/5000K/6000K | ||||
I-Luminous Flux(Lm/w) | 100-125lm/w | ||||
Igalelo lombane | I-AC 100V - 277V, 50 - 60Hz | ||||
I-engile yoMtha (iqondo) | >120° | ||||
CRI | >80 | ||||
Amandla Factor | >0.9 | ||||
Indawo yokusebenza | Ngaphakathi | ||||
Izinto zoMzimba | Isakhelo seAluminiyam + LGP + PS/PMMA Diffuser | ||||
IP Rating | IP20 | ||||
Iyacimeka | 0~10V(UL) | ||||
Ubushushu bokusebenza | -20 ° ~ 65 ° | ||||
Ufakelo loKhetho | Isilingi iphinde yamiswa/ inqunyanyisiwe/ ingaphezulu/ iNtaba yodonga | ||||
Umsebenzi wobomi | Iiyure ezingama-60,000 | ||||
Iwaranti | Iminyaka emi-5 |
3. Iphaneli yeLED yeMifanekiso yokuKhanya:
4. Ukusetyenziswa kokukhanya kwePaneli ye-LED:
Ukukhanya kwePaneli ye-UL ye-LED yeyona nto ifanelekileyo yokutshintsha amandla ombane afanelekileyo kwiiofisi, izikolo, iindwendwe, ukhathalelo lwempilo, kunye nezinye iintengiso kunye nezicelo zemizi-mveliso ezifuna ubunzulu bofakelo oluncinci.
Iprojekthi yokuFakela kwakhona:
IProjekthi eNyuselwe uMphezulu:
Iprojekthi yoFakelo oluNxinyiweyo:
IProjekthi yoFakelo oluNyulwe eludongeni:
Isikhokelo soFakelo:
Ukukhanya kwepaneli ye-LED, kukho i-ceiling recessed, umphezulu ophakanyisiweyo, ufakelo oluxhonyiweyo, udonga oluxhonywe njl.Umthengi unokukhetha ngokweemfuno zabo.
Ikhithi yokuNxinywa:
Ikhithi yokuxhoma emisiweyo yephaneli ye-LED ivumela iiphaneli ukuba zinqunyanyiswe ukuze zibonakale zihombe ngakumbi okanye apho kungekho silingi yegridi yesiqhelo ye-T-bar.
Izinto ezibandakanyiweyo kwiKit yeNtaba eNxinyiweyo:
Izinto | PL-HPA4 | PL-HPA8 | ||||
6060 | 3012 | 6012 | ||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 2 | X 4 | |||||
X 4 | X 8 |
Ikhithi yeSakhelo sokuNyuka:
Esi sakhelo sokunyuka komphezulu sifanelekile ukufaka izibane zepaneli ze-Lightman ze-LED kwiindawo ngaphandle kwegridi yesilingi emisiweyo, njengeplasterboard okanye iisilingi zekhonkrithi.Ilungele ii-ofisi, izikolo, izibhedlele njl.
Okokuqala jija amacala amathathu efreyimu kwisilingi.Iphaneli ye-LED emva koko ifakwe isilayidi. Ekugqibeleni gqibezela ufakelo ngokukrukra icala eliseleyo.
Isakhelo sokunyuka komphezulu sinobunzulu obaneleyo ukulungiselela umqhubi we-LED, omele ubekwe embindini wepaneli ukuze ufumane ukuchithwa kakuhle kobushushu.
Izinto ezibandakanyiweyo kwiKhithi yeSakhelo seMount yoMphezulu:
Izinto | I-PL-SMK3030 | I-PL-SMK6363 | I-PL-SMK1233 | I-PL-SMK1263 | |
Isakhelo Dimension | 310x313x50mm | 610x613x50mm | 1220x313x50mm | 1220x613x50mm | |
L310 mm | L610mm | L1220mm | L1220mm | ||
L310mm | L613mm | L313mm | L613mm | ||
X 8 iipcs | |||||
X 4 iipcs | X 6 iipcs |
Iikliphu zaseNtwasahlobo:
Iziqeshana zasentwasahlobo zisetyenziselwa ukufaka ipaneli ye-LED kwiplanga yeplasterboard kunye nomngxuma osikiweyo.Ilungele ii-ofisi, izikolo, izibhedlele njl.
Okokuqala jija iikliphu zasentwasahlobo kwiphaneli ye-LED.Iphaneli ye-LED emva koko ifakwe kumngxuma osikiweyo wesilingi.Ekugqibeleni ugqibezele ukufakela ngokuhlengahlengisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ufakelo luqinile kwaye lukhuselekile.
Amanqaku aqukiwe:
Izinto | PL-CPA4 | PL-CPA8 | ||||
6060 | 3012 | 6012 | ||||
X 4 | X 8 | |||||
X 4 | X 8 |
UkuKhanya kweOfisi (eTshayina)
UkuKhanya kwendlela engaphantsi (eTshayina)
UkuKhanya kweThala leencwadi (eJamani)
UkuKhanya kwesibhedlele (eJamani)