Iphaneli yoPhahla ye-LED ye-100lmw 1×4 yesikwere se-UL ye-LED Umphezulu weSilingi Umfanekiso obonisiweyo

I-100lmw 1 × 4 Square UL LED Surface Ceiling Panel Light Fixture

Iphuhliswe ngesizukulwana samva nje sokukhanyisa okuqinileyo kunye nobuchwepheshe bokuqhuba nge-elektroniki, esi sibane sephaneli ye-LED esingu-1′×4′ singaphezulu kwabakhuphisana nabo ngokubonelela ngolwakhiwo olusebenza kakuhle kakhulu olukhanyisa imiphetho kwaye luphucula ukonga amandla ngokubanzi.

Into:Isibane sePaneli ye-LED esingu-1x4ft

Amandla:30W /40W /50W

I-Voltage yokufaka:I-AC100-277V, 50-60Hz

Ubushushu bombala:3000K /4000K /5000K /6000K

Umsebenzi wobomi:Iiyure ezingama-≥60000

Thumela i-imeyile kuthi Khuphela njengePDF

Iindidi zemveliso

Iinkcukacha zeMveliso

1. ImvelisoIimbonakaloof 1x4I-LEDIphaneliUkukhanya30W.

• Iphaneli ye-LED eyonga umbane ihlala ixesha elide ngokuphindwe kahlanu kuneephaneli ze-fluorescent, Isebenza ngaphakathi koluhlu olubanzi lwe-100-277 VAC.

•Kusetyenziswa i-aluminium engu-6063 - T5 kwisakhiwo, eqinisekisa ukuba umphezulu awugqwali, kwaye inomsebenzi ophezulu wokuhambisa ubushushu.

•Ukukhanya kunika ukukhanya okugqamileyo eluphahleni, kusetyenziswa ukukhanyisa okuphantsi ngaxeshanye. Ilensi yayo ye-polycarbonate ecacileyo eneziko eliqandisiweyo inika ukukhanya okuthambileyo ngaphandle kwezibane ezibonakalayo okanye iindawo ezishushu.

•Ubukhulu obufumanekayo (mm): 2x4 ft (40w 50w 60w), 1x4 ft (30w 40w 50w), 2x2 ft (30w 40w 50w) isibane sephaneli ye-LED.

•Umqhubi we-PF ephezulu, PF>0.9, umqhubi omtsha wamandla angaguqukiyo osebenza kakuhle kakhulu.

•Kulula ukuyifaka nokuyisusa. Kwindlela yokufaka izibane zephaneli ye-LED, kukho ezivaliweyo, ezixhonyiweyo, ezifakwe kumphezulu kunye nezifakwe eludongeni.

•Ixesha elide lokuphila iiyure ezingama-60,000 kwaye iindleko zokulungisa ziphantsi kakhulu.

2. Iinkcukacha zeMveliso:

Inombolo yoMzekelo	I-PL-1x4-30W-100	I-PL-1x4-30W-125	I-PL-1x4-40W-100	I-PL-1x4-40W-125	I-PL-1x4-50W-100
Imodeli ye-UL/DLC	ET-14-30WD-100	ET-14-30WD-125	ET-14-40WD-100	ET-14-40WD-125	ET-14-50WD-100
Ukutya umbane	30W	30W	40W	40W	50W
Ubukhulu (mm)	303x1213x10mm
Uhlobo lwe-LED	I-SMD2835
Ubushushu boMbala (K)	3000K/4000K/5000K/6000K
I-Flux ekhanyayo (Lm/w)	100-125lm/w
I-Voltage yokufaka	I-AC 100V – 277V, 50 - 60Hz
I-Angle yeBeam (isidanga)	>120°
I-CRI	>80
Amandla	>0.9
Indawo yokusebenza	Ngaphakathi endlini
Izinto zomzimba	Isakhelo seAluminiyam+ iLGP+ iPS/PMMA Diffuser
Uvavanyo lwe-IP	IP20
Iyancitshiswa	0~10V(UL)
Ubushushu bokusebenza	-20°~65°
Ukhetho Lokufaka	Isilingi Eyongeziweyo/ Exhonyiweyo/ Ephezulu/ Exhonywe eludongeni
Umsebenzi wobomi	Iiyure ezingama-60,000
Iwaranti	Iminyaka emi-5

3. Imifanekiso yokukhanya kwephaneli ye-LED:

5. Isibane sephaneli esisicaba se-LED esingu-1x4

4. Ukukhanya kwePaneli ye-LED Isicelo:

Izibane zePaneli ze-UL LED zezona zifanelekileyo zokutshintsha izixhobo ze-fluorescent kwiiofisi, ezikolweni, kwiindawo zokwamkela iindwendwe, kwezempilo, nakwezinye iintengiso kunye nezicelo zoshishino ezifuna ubunzulu obuncinci bokufakelwa.

Iprojekthi Yokufakela Engagqitywanga:

Iphaneli yophahla ye-LED engu-8. 300x1200

Iprojekthi Efakwe Kumphezulu:

Isibane sephaneli se-LED esingu-9. 30x120

Iprojekthi Yokufakela Emiswe Ngesandla:

10. Isibane sephaneli se-LED esingu-1200x300

Iprojekthi Yokufakela Udonga Olufakelwe:

Isikhokelo soFakelo:

Kwizibane zephaneli ze-LED, kukho iindlela zokufaka ezifakwe eludongeni, ezifakwe kumphezulu, ezixhonyiweyo, ezifakwe eludongeni njl.njl. iindlela zokufaka ezinezixhobo zokufaka ezifanelekileyo. Umthengi unokukhetha ngokweemfuno zakhe.

11. Isikhokelo sokufaka isibane sephaneli ye-ul LED

Ikhithi yokumiswa:

Isixhobo sokuxhoma esixhonyiweyo sephaneli ye-LED sivumela iiphaneli ukuba zixhonywe ukuze zibukeke zintle ngakumbi okanye apho kungekho silingi yegridi ye-T-bar yendabuko ekhoyo.

Izinto eziqukwe kwiSuspended Mount Kit:

Izinto	PL-I-HPA4	I-PL-HPA8
	6060	3012	6012
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 2	X 4
	X 4	X 8

Ikhithi yesakhelo sokuFakela umphezulu:

Olu phahla lokuxhoma umphezulu lufanelekile ukufaka izibane zephaneli ze-Lightman LED kwiindawo ezingenayo igridi yesilingi exhonyiweyo, njengeplasterboard okanye isilingi sekhonkrithi. Lulungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhoma okungasemva kungenakwenzeka.

Okokuqala faka amacala amathathu esakhelo esilingeni ngesikrufu. Emva koko iphaneli ye-LED iyatyibilika. Ekugqibeleni gqibezela ukufakela ngokukrufula icala eliseleyo.

Isakhelo sokufakelwa komphezulu sinobunzulu obaneleyo bokwamkela umqhubi we-LED, ekufuneka ubekwe embindini wephaneli ukuze ufumane ubushushu obuhle.

Izinto eziqukiweyo kwiSurface Mount Frame Kit:

Izinto	PL-SMK3030	PL-SMK6363		PL-SMK1233	PL-SMK1263
Ubukhulu besakhelo	310x313x50mm	610x613x50mm		1220x313x50mm	1220x613x50mm
Isakhelo A	L310 mm X 2 ii-pcs	I-L610mm X 2 ii-pcs		L1220mm X 2 ii-pcs	L1220mm X 2 ii-pcs
Isakhelo B	L310mm X 2 ii-pcs	I-L613mm X 2 ii-pcs		L313mm X 2 ii-pcs	I-L613mm X 2 ii-pcs
	Ii-X 8 ii-pcs
	X 4 ii-pcs		Ii-X 6 ii-pcs

Iikliphu zaseNtwasahlobo:

Ii-spring clips zisetyenziselwa ukufaka iphaneli ye-LED kwisilingi yeplasterboard enemingxuma esikiweyo. Ilungele iiofisi, izikolo, izibhedlele njl.njl. apho ukuxhonywa okungasemva kungenakwenzeka.

Okokuqala faka iikrufu zentwasahlobo kwiphaneli ye-LED. Emva koko iphaneli ye-LED ifakwa kumngxuma osikiweyo wesilingi. Ekugqibeleni gqibezela ukufakela ngokulungelelanisa indawo yephaneli ye-LED kwaye uqinisekise ukuba ukufakela kuqinile kwaye kukhuselekile.

Izinto ezibandakanyiweyo: